MapleGrid AI — RoofIQ

First quote wins
the roofing job.
Be first.

Plug in your measurements. RoofIQ instantly generates accurate labour hours, a code-compliant material list, and full pricing — flat or sloped, residential or commercial.

Start Free Trial See How It Works

⚡ The contractor who quotes first wins 60% of roofing jobs. RoofIQ gets you there in minutes.

The real cost of slow estimates

Roofing jobs go to whoever quotes first.

🐌

Slow quotes lose jobs

A homeowner calls three roofers. The first one back with a number usually gets the job. If you're building your estimate manually, you're already behind.

📐

Wrong material quantities

Over-ordering wastes money. Under-ordering stops the job mid-way. Getting quantities right from your measurements is harder than it looks.

📋

Missing code-required materials

Ice and water shield, proper underlayment, venting requirements — missing a code-required material on the quote means surprises at inspection.

💸

Labour hours off the mark

Underestimate tear-off time on an old roof and you've already lost margin before the first shingle goes down.

How RoofIQ works

Three steps to a complete roofing estimate.

01

Plug in your measurements

Enter your roof dimensions — length, width, pitch, and any details about the scope (tear-off, valleys, dormers, flat sections).

02

RoofIQ calculates everything

Labour hours, material quantities, code-compliant specifications, and current Canadian pricing — all generated automatically for flat or sloped roofs.

03

Send the quote

Review your complete estimate with HST/GST calculated by province and send a professional quote to your client before the competition even picks up the phone.

What RoofIQ generates

Everything in one estimate.
Nothing missing.

Flat & Sloped Roofs

Auto-detects your roof type. Adjusts everything.

RoofIQ automatically adjusts material specifications, labour hours, and code requirements based on whether you're quoting a flat commercial roof or a sloped residential roof. No manual switching, no wrong materials.

🏠 Sloped Roof
🏢 Flat Roof
Roof area (calculated) 2,240 sq ft
Pitch detected 6/12
Waste factor 12%
Shingles required 25 squares
Code-Compliant Materials

Every material. Correct quantity. Right price.

RoofIQ generates a complete material list based on Canadian municipal and provincial building code. Ice and water shield, underlayment, shingles, flashing, drip edge, venting — all specified with quantities and current prices. Nothing left off the list.

Material List — Sloped Residential
Architectural shingles (sq) 25 sq — $1,875
Ice & water shield (rolls) 8 rolls — $480
Synthetic underlayment 4 rolls — $280
Drip edge (linear ft) 180 ft — $216
Ridge cap shingles 3 bundles — $135
✓ Ontario Building Code compliant
Complete Quote Output

Labour + materials + tax. Ready to send.

RoofIQ combines RSMeans-calibrated labour hours with your material costs and Canadian HST/GST by province into a complete roofing quote. What used to take half a day takes 5 minutes.

Quote Summary — Residential Re-roof
Tear-off (8 hrs @ $85/hr) $680.00
Installation (16 hrs @ $95/hr) $1,520.00
Materials $3,186.00
HST (13% — Ontario) $700.58
Total Quote $6,086.58
📤 Send Quote to Client

Built for two types of pros

Whether you're on the roof or managing the project.

🏠 Roofing Contractors

  • Quote jobs faster than the competition
  • Never miss a code-required material again
  • Get accurate labour hours for every scope
  • Send professional quotes from your phone on site
  • Win more jobs by being first with a number

🏗️ General Contractors

  • Know roofing costs before calling a roofing sub
  • Include accurate roofing in whole-project quotes
  • Protect your margin on design-build projects
  • Quote confidently without being a roofing specialist
  • Works alongside JobIQ for complete job management
5 min Average time to complete a roofing estimate
Flat +
Sloped Both roof types supported
$10 CAD per month add-on
HST ✓ All provinces calculated automatically

How we stack up

RoofIQ vs. the alternatives

Feature RoofIQ (MapleGrid) Manual Estimate Roofr / US Tools
Built for Canadian contractors ✓ Yes — DIY — US-focused
Labour hours auto-calculated ✓ RSMeans-calibrated — Guesswork Partial
Code-compliant material list ✓ Auto-generated — From memory — US codes
Flat & sloped roof support ✓ Both Manual Sloped only
HST/GST by province ✓ Built in — Manual — No
Time to complete estimate ~5 minutes 2–4 hours 30–60 min
Starting price (CAD) $10/month add-on Free (time = money) $125–299+/month

Common questions

Everything you need to know about RoofIQ

Questions roofing contractors and GCs ask us most.

What is RoofIQ?
RoofIQ is an AI-powered roofing estimating tool built for Canadian roofing contractors and general contractors. You plug in your roof measurements and RoofIQ instantly generates accurate labour hours, a code-compliant material list with quantities, and full pricing — so you can send a professional quote faster than your competition.
How does RoofIQ calculate roofing labour hours?
RoofIQ uses RSMeans-calibrated pricing and Canadian trade labour standards to calculate roofing labour hours based on your measurements, roof type, and scope of work. You get an accurate labour hour breakdown for every task — tear-off, underlayment, shingles, flashing, and more.
Does RoofIQ work for both flat and sloped roofs?
Yes. RoofIQ automatically detects whether you are estimating a flat or sloped roof and adjusts material quantities, labour hours, and code-compliant material selections accordingly. Both residential sloped roofing and commercial flat roofing are supported.
Does RoofIQ provide code-compliant roofing material lists?
Yes. RoofIQ generates a complete material list based on Canadian municipal and provincial building code requirements. Every material — underlayment, shingles, flashing, venting, ice and water shield — is specified correctly for the scope, with quantities and current prices included.
Can general contractors use RoofIQ to estimate roofing costs?
Yes. RoofIQ is built for both roofing contractors and general contractors who need accurate roofing costs before consulting a roofing sub. Generate a complete roofing estimate from your measurements without being a roofing specialist.
Does RoofIQ include Canadian HST and GST?
Yes. RoofIQ calculates HST and GST by Canadian province automatically. Your roofing estimate reflects the correct tax rate for your province — no manual tax calculations needed.
How much does RoofIQ cost?
RoofIQ is available as an add-on at $10 CAD per month or included in the MapleGrid AI All-Access plan at $75 CAD per month, which includes all six trades tools. PriceIQ is permanently free with no subscription required.
What is the best roofing estimating software for Canadian contractors?
RoofIQ by MapleGrid AI is built specifically for Canadian roofing contractors and GCs. Unlike US-based tools like Roofr, RoofIQ uses Canadian building code standards, Canadian labour rates, RSMeans-calibrated pricing, and calculates HST/GST by province. Plug in your measurements and get a full roofing estimate in minutes.

The next roofing job goes to
whoever quotes first.

Start your free trial today. No credit card required. Built for Canadian contractors.

Start Free Trial — It's Free

Add-on from $10 CAD/month · All-Access $75/month · Cancel anytime